HALL of SHAME PHOTo`s

[Whyme]

double trouble... young plumber threading pipes too close to edge of stud and blind plasterer screwing through both left and right pipes......6 weeks before leak showed..btw the chewed up looking wood was me trying to find leak..

 

[Bunker]

Custard: "Boiler needs a service, its packed up"
Me: "well you should have looked after it. Good luck and good bye. "

 

[Ermintrude]

We only get 20l of hot water at best? Overflow always running?

 

[Ermintrude]

 

[Bunker]

Talk me through that please, looks like a standard combination cyl set up as unvented ??

 

[smtplumbing]

looks like albion vented cylinder mains thermal store

 

[Ermintrude]

Yep. Mains store

 

[smtplumbing]

i had massive problem few weeks ago with one of these i posted up here and not one helped me lol. hardly any hot water and the rads were not heating up well

 

[Ermintrude]

Coil at base heats store coil at top delivers hot . Headder is for the store. Not an amazing performer.

Initially looks like an open vent cyl with two DHW drawoffs.

It's not big enough for house and boiler struggles

 

[TBServices]

Quality job

 

[Ermintrude]

i had massive problem few weeks ago with one of these i posted up here and not one helped me lol. hardly any hot water and the rads were not heating up well

Don't remember, would have given u some brilliant advise. Rip it out.

 

[smtplumbing]

when i first saw it, Totally confused me with two pumps. bad side boiler is allways on. and takes 1 hour and half to heat the full thing back up

 

[galaxy_plumbing]

how many of you would service this? Ideal Concord installed in 1977, been there 3 hours today, cleaned all, plus replaced case seal and pump, but not giving it much longer. Looked like chimney sweep afterwards, bloody thing

 

[stani]

View attachment 16641View attachment 16642

how many of you would service this? Ideal Concord installed in 1977, been there 3 hours today, cleaned all, plus replaced case seal and pump, but not giving it much longer. Looked like chimney sweep afterwards, bloody thing

Did you manage to get right the way through the heat ex?

 

[Barry98]

id of got some after shots

 

[galaxy_plumbing]

yes, it would be sticker on it by now otherwise.

 

[lame plumber]

easier than coring 🙂

 

[Robert Tyrrell]

View attachment 16644easier than coring 🙂

Is that ventilation correct? 😉

 

[Barry98]

View attachment 16644easier than coring 🙂

thats bad

 

[Ermintrude]

Ega pipe work on half landing