HALL of SHAME PHOTo`s

[Alanc]

Is the bent iron fitted straight onto the balofix

 

[P J F PLUMBING]

It's a gas fire restricter elbow botched into a ballafix

 

[Resolute]

Is the balofix a gas fitting?

 

[P J F PLUMBING]

Spot the problem or problems

 

[IDCHAPPY]

View attachment 16939 Spot the problem or problems

That's not a boiler flue is it? :lol:

 

[IDCHAPPY]

View attachment 16937 Can you fit my hob he said .... It's a easy strait swap he said .....

Looks like he used whatever shyte he found in the bottom of a fittings box 🙂

 

[P J F PLUMBING]

That's not a boiler flue is it? :lol:

Yes the pic is side wards

 

[IDCHAPPY]

Looks like it's not venting to an external place...

 

[Toxic Ted]

View attachment 16937

Man alive, that's a shocking display Tom bodgery.......he's burned the wallpaper!

 

[rpm]

With all the room available why put it over the lid that I need to remove? Not to mention using an olive compression fitting on white waste overflow pipe.

 

[Alanc]

With all the room available why put it over the lid that I need to remove? Not to mention using an olive compression fitting on white waste overflow pipe.

View attachment 16981

That's ruff as...
Is it a 22mm fitting loosely fitted onto 21.5mm pipe?.

Al

 

[rpm]

That's ruff as...
Is it a 22mm fitting loosely fitted onto 21.5mm pipe?.

Al

He used brass 22mm compression fitting on 21.5mm plastic which goes up in to loft and is full of water, then added the drain off right next door to the fused spur.

 

[Dave Walker]

Not sure if they were trying to save some money on copper or what

 

[IDCHAPPY]

No way...surely?? :lol:

 

[Reg Man]

More worrying parallel thread on ballafix on to parallel iron fitting, or is it just the ballafix, or is it a candidate for hall of shame and RIDDOR reportable offence, what ever.

 

[stevetheplumber]

Not sure if they were trying to save some money on copper or what

if they had piped it tboe it would have vented its self

 

[Whyme]

thats screaming out for a fan to be bolted to the wall above it, diy blower. oh yeah.

 

[Riley]

Ingenious use of an old boiler flue to run an extractor fan. Approx 4 metres straight up to peak of roof. Funnily enough it doesn't work

 

[Riley]

Same roof they have re routed the soil pipe by means of a dryer hose around some botched loft flooring. Very little to support it and they can't understand why the flashings moved and they now have a serious leak.

 

[Alanc]

Top quality guaranteed