HALL of SHAME PHOTo`s

[Dusty23]

Water or Gas?

Water thankfully but then found this wonderful custom made extractor flue adaptor !!

 

[Sparkgap]

The dangerous thing about it is he follows me round asking questions "learning" for the future!
ill admit, people like this do worry me!

So, have you told him the secret way of fixing gas pipe with duck tape, or how he can get hot water for free by wiring the mains to the HW pipes? Go on, I dare ya! :cowboy:

 

[Marka1411]

Did this chap design that M6 interchange in Birmingham.

Cant stop laughing at this comment

 

[chris watkins]

Sorry for the poor images.
Two cisterns on the roof of a London hostel supplying water for I think it was around 40 persons along with this there was flexy heaven, an un-vented cylinder with no controls apart from the T&P, oh & a gas leak that they were informed was within acceptable limits even though you could smell it !!
Still no need to stop these people "practicing" plumbing, a.

 

[Ch4 plumbing]

Theirs a plant growing out of the bottom cwsc and you would have to be above average height to read the pressure gauge on the cylinder!

 

[Crinkmeister]

I'm sure some of those pipes don't actually go anywhere!

 

[chris watkins]

Theirs a plant growing out of the bottom cwsc and you would have to be above average height to read the pressure gauge on the cylinder!

I think they said it was called Hydroponics either that or a roof top garden !!

& I believe you are right Crinkmeister, I think the engineer said the cylinder was not being used now the combi had been installed but hay why bother to strip it all out, just leave it a in place but not used !!!
You could not make the stuff up that was found on this job.

 

[rpm]

Came across these the other week

 

[Riley]

View attachment 17599

Came across these the other week

Seriously how hard just to do a little copper bend

 

[chris watkins]

Seriously how hard just to do a little copper bend

Very, if you haven't got a machine !!

 

[Riley]

Very, if you haven't got a machine !!

Tis true

 

[Kev the gas]

must be a watermill thing !

 

[Crinkmeister]

Ye gods! They must have to try so hard to make the installation look awful!

Anyway, what's a vave? Oh I know - it's what you do go avay - vave goodbye!!

 

[Ch4 plumbing]

Now that is special!!

 

[Irish]

Yeah good job he got the cable in that lovely bit of trunking ! Woulda looked unsightly and unprofessional otherwise!!

 

[Crinkmeister]

Yeah good job he got the cable in that lovely bit of trunking ! Woulda looked unsightly and unprofessional otherwise!!

I can't decide if the trunking or the shelf is at an angle?....Maybe both!

 

[Ch4 plumbing]

I bet when the pump kicks in it dances left to right!

 

[simon0703]

That's a immense bit of workmanship

 

[Toxic Ted]

Shocking colour coordination with the hangers......

 

[kay-jay]

View attachment 17600
must be a watermill thing !

Oi dont take the mick, im still on chapter one.😱