outside tap questions

[Best]

Wish those flanges were made with a bigger diameter so the screw holes were further out! :smile:
And why they use 3 holes, when 2 would be more than enough? - flange when screwed tight to the wall with 2 screws cannot move any direction!

 

[and1e]

Definately use the hose union backplate, then its only the tap that is exposed, I`ve not used anything else for years, add a service valve inside and tell the customer to isolate and open tap when not in use.

 

[helpsy]

You could also buy one of those bulky insulated tap covers!