sent to me from an agency
Combi boiler swap inc local pipework up to 1mtr per service. Powerflush, condense and
commissioning £200.00
SYSTEM/ Regular boiler inc local pipework up to 1mtr per service. Powerflush, condense
and commissioning £190.00
Re-site from back boiler removal £18.00
Vert flue installation complete (installer only) £32.00
Install new cylinder including parl L lagging £60.00
Exchange Unvented Hot Water Cylinder £80.00
Cylinder - convert to fully pumped Y/S plan inc pipe £120
Reconfigure airing cupboard pipework i.e. coldfeed/open vent/reposition/pump/controls inc
pipe £30.00
Fit pressure vessel £20.00
Fit 'Y' or 'S' plan convert to fully pumped inc pipe £85
Fit Auto Bypass Valve ONLY £10.00
Powerflush inc water test £60.00
Fit Magnaclean/Boiler Buddy £12.00
Cold Water Storage HWT £40.00
Fit new radiator including valves and pipework up to 1m £25.00
Fit new radiator valve (not to be used in conjunction with above) £2.00
New pipework 15/22mm including lagging £4.50
Fit new cooker point 1m of pipework & bayonet £17.50
Replace stop tap £5.00
Make good balanced flue hole (12x12) £15.00
Fix boards for boiler install £12.50
Recall attended by other -£30.00
Draindown system - (only to be used with below code indicated with **) £27.50
**exchange S/Y plan valves £5.00
Production of commissioning LGSR £12.50
doesnt say if its cards or s/e but reading it you have to supply pipe and fittings £2 for a rad valve?????
Combi boiler swap inc local pipework up to 1mtr per service. Powerflush, condense and
commissioning £200.00
SYSTEM/ Regular boiler inc local pipework up to 1mtr per service. Powerflush, condense
and commissioning £190.00
Re-site from back boiler removal £18.00
Vert flue installation complete (installer only) £32.00
Install new cylinder including parl L lagging £60.00
Exchange Unvented Hot Water Cylinder £80.00
Cylinder - convert to fully pumped Y/S plan inc pipe £120
Reconfigure airing cupboard pipework i.e. coldfeed/open vent/reposition/pump/controls inc
pipe £30.00
Fit pressure vessel £20.00
Fit 'Y' or 'S' plan convert to fully pumped inc pipe £85
Fit Auto Bypass Valve ONLY £10.00
Powerflush inc water test £60.00
Fit Magnaclean/Boiler Buddy £12.00
Cold Water Storage HWT £40.00
Fit new radiator including valves and pipework up to 1m £25.00
Fit new radiator valve (not to be used in conjunction with above) £2.00
New pipework 15/22mm including lagging £4.50
Fit new cooker point 1m of pipework & bayonet £17.50
Replace stop tap £5.00
Make good balanced flue hole (12x12) £15.00
Fix boards for boiler install £12.50
Recall attended by other -£30.00
Draindown system - (only to be used with below code indicated with **) £27.50
**exchange S/Y plan valves £5.00
Production of commissioning LGSR £12.50
doesnt say if its cards or s/e but reading it you have to supply pipe and fittings £2 for a rad valve?????