Pretty sure this is boiler related. In the Vogue there’s a link that needs to be removed when commissioning that’s easy to miss. Could be something like that that’s interfering with the switching. Talk to Ideal and explain the issue they may help with something like this even if not an installer.
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter Husk24
- Start date
-
- Tags
- boiler thermostat
if the hot water is working ok but not the heating its not a boiler problem as common switched live to boiler for both unless youve got weather compensation fitted then seperate switched lives needed
One thing I have noticed it works fine when im away from home or should I say when my car is not parked in garage, apparently they both run on the same frequency, maybe an interference which the thermostat cannot cope. My gas/electric SMART METER goes off/disconnects as soon as I park my car, comes back on when I drive away! When I disable the sensor in my car the smart meter comes on.
I bet you don’t get free gas and electric though, if you do maybe smart meters do have a use.
I've had a similar hit-and-miss with room stat MT10 RF (battery operated) paired with Worcester Greenstar 25 si Compact Combi. Technical Support at Worcester-Bosch told me the stat has an accuracy rating of +/- 5 deg C which is useless. I've tried turning the room stat to max and relying on TRVs but I reckon TRVs also have a similar accuracy range. If I throw money at the problem what do people recommend?
My issue has been resolved, the first thermostat wireless was faulty and when replaced it appeared one of my valves was sticking, bit of a coincidence but that was the issue , no replaced and no issues!
You said, the boiler is switched off over night. Do you mean you kill the power to the boiker over night?
Depending how stat has been wired, turning power off can cause stat to loose communication with receiver. You don’t need to kill the power over night. If you do loose power you might have to press reset button on stat.
Depending how stat has been wired, turning power off can cause stat to loose communication with receiver. You don’t need to kill the power over night. If you do loose power you might have to press reset button on stat.
The thermostat temp is set to 5 overnight, so boiler does not come on. I have had a nest installed today.
Official Sponsors of Plumbers Talk
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
