Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Jun 10, 2009
5,168
811
113
Hampton court, Surrey
The boss and I are installing a boiler tomorrow, and to be honest, the only place to install the condensate is into the rain water pipe. Is this allowed?

I can not see any where that says no.

Also, is there a boss for this type of thing, or do you just cut and seal with silicone?

This is my home work from the governor.

Cheers fellers
 
Thanks marley, I know i have seen them done like this before. And that is where i got the idea from. So, i shall give the governor our options tomorrow.

Thanks for all the replies guys. It does seem that everyone has seemed to have done this once. So, i shall have a go too.
 
The answer to the question is No.
You are not allowed to put into rain water, I am sorry but I cannot remember the reason. British gas had to change there regs because they were told off for doing it.
 
never silicone a fitting which will have condense water through it as the condense water eats through many silicone sealants.
I never knew that about it eating through silicone. Although if pipe was inserted into rain pipe and siliconed around pipe it would not come into contact. I do stress that this is not the appropriate means of connection and a suitable connection would be better. It's just a cheat really. You will more than likely pick up a hopper from mkm. Or a y piece fitting, then run rain water pipe to point of entry of condensate into building. You could drop 32mm into this.
 
I read somewhere couple year ago (cant remember exactly where) that the amount of acidic water now going into sewage or ground is now a concern for contamination . So once this becomes common knowledge we will probably be terminating it into buckets !!!
I did hear couple weeks ago that worcester now are making noises of sleeving the condense pipe through walls , not seen nothing in mi's as yet tho .
 
i also remember reading something a while ago about condensate in sewers.
the theory says the acidic water from the many 1000's of boilers discharging into sewers will eventually build up and ruin the eco system in there....
 
i also remember reading something a while ago about condensate in sewers.
the theory says the acidic water from the many 1000's of boilers discharging into sewers will eventually build up and ruin the eco system in there....

i heard this too, but its mainly the utilities companies kicking up fuss because of the increased cost of treating the water.
 
See section 2.3 and figure 5 to the attached link.
[DLMURL="http://www.centralheating.co.uk/checklists/frozen-condensate-pipes/frozen-condensate-guidance-installer#5"]HHIC » Frozen Condensate Guidance for Installer[/DLMURL]
 
Last edited by a moderator:
and just to put a spanner into the works....

unless there is already one there and you are renewing it,

you can no longer install a hopper........

as i was told by a b.c inspector recently, its against building regs?.
 
I always use to terminate it into a Mcalpine tee if in the kitchen now i try use clamp1gr/wh . But like i have said i have terminated about 4/5 into downpipes this year .
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.