flexible mono block tap connector

[sarah01]

Hi,
I was just wondering if anyone could help us find a flexible mono block tap connector like the one shown in the picture. It has a female end which is 15mm and the length of it is 450mm. It has a 10mm wide solid pipe on the end which needs to be 100mm long. All our local plumbing suppliers don't know where we can get one from? We have found a 300mm length one but the solid end is only 40 mm long (from screwfix and B&Q) but not the longer length we require? Any help will be much appreciated. Many thanks

 

[Harvest Fields]

What tap is it? Any pictures?

 

[sarah01]

Hi, please see tap attached thanks

 

[Harvest Fields]

Best I can see at short notice mate.

 

[rpm]

I`m not going looking right now but try fleabay with compression fitting not speedfit.

 

[rpm]

Best I can see at short notice mate.

Do you call your female customers "mate"? 😛

 

[Welder]

These are not something I've ever seen stocked as a separate item.
The JG ones HF are too wide and, unf, not deep enough (I've tried!).
Personally I'd try instead some std copper tails.

 

[king of pipes]

As above swap for a copper tail . Kop

 

[Welder]

Do you call your female customers "mate"? 😛

Why not?
Is not everyone to be treated the same these days?
To 'consider' anyone based upon their gender, height, weight, hair colour or any other 'difference' one can conceive is surely *** 'ist' in 2019. 😉
My favourite is 'bonkers-ist' because my manners dictate I have to hold a door open for whoever it is following me - then one is abused. 🙄

 

[ShaunCorbs]

Do you call your female customers "mate"? 😛

Your assuming there identifying as female

 

[rpm]

Your assuming there identifying as female

Guys please remember that this is open thread and sarah01 is receiving every post. 😉