HALL of SHAME PHOTo`s

[Koogatubac]

Lol all went inside the new baxi duo tec box btw the cylinder feed is a 30mm lead pipe with NO drain off

 

[Ermintrude]

No words required .

That's supposed to be a 75mm gravlon screed?

 

[Ermintrude]

Flexi-con patents pending I believe

 

[Ermintrude]

Vent / conny combo.

 

[Irish]

Tut he coulda at least used white tape

 

[PlumbBobBob]

obviously put the conny in before soldering

 

[Ermintrude]

I thought it was a making good effort after being sliced due to external 5m of flat 21.5 on its arse!

 

[Keefy]

Found it on Tw@tter

 

[Leo21]

View attachment 16214

Found it on Tw@tter

How did they glue everything on to the ceiling?

 

[Irish]

How did they glue everything on to the ceiling?

Bit awkward getting the vent key in that one

 

[Keefy]

It's got to be up there (no pun intended) with that rad going up the stairs.

 

[Sparkgap]

How did they glue everything on to the ceiling?

Bl**dy aussie plumbers....!

 

[tamz]

Bit awkward getting the vent key in that one

Self venting :wink:

 

[jonnyswamp]

Spending a penny

Found this under the floor of a house we were 1st fixing, this was a live, in-use gas pipe
This isn't a wind up, its genuine
It must have took longer to solder in position than it would have to go to the merchants (1/2 mile away) and get the right fittings

Just in case anyones short sighted, yes it is a one pence piece

 

[TBServices]

Me either lol

 

[Keefy]

Sorry. But I can't make head not tail of this photo?

Could you explain please

Open ended gas pipe? :grin: Nah, I'm not sure what the deal is either.

Also, dunno if you can really say this is worthy of the HoS but I haven't come across many bodge's lately:

 

[chris watkins]

No words required .

That's supposed to be a 75mm gravlon screed?

Is it supposed to be a Gyvlon screed?

 

[Killy Bing]

A trv on a towel rad!

The cheek!

more concerned about how much that olive is on the pipe as it enters the elbow !!!

check the angle!

 

[Ermintrude]

From top down that's a 6*2 on its side to give sense if scale.
Next is the painted on gyvlon (Lafarge Tarmac screed) always called it gravlon after misquoted a drawing many moons ago. screed, next the clingfilm used instead of a membrane then the insulation then a 28mm gas pipe hacked off to allow shuttering !

 

[chris watkins]

From top down that's a 6*2 on its side to give sense if scale.
Next is the painted on gyvlon (Lafarge Tarmac screed) always called it gravlon after misquoted a drawing many moons ago. screed, next the clingfilm used instead of a membrane then the insulation then a 28mm gas pipe hacked off to allow shuttering !

So just a tad more than the 75mm depth you were expecting then ? still a good amount of thermal mass now!!