Installing seals in Barber Wilsons gooseneck spout

[Jeffo405]

Please let me know how to replace the seals in a Barber Wilsons kitchen "gooseneck" faucet. These are the seals that go in the base of the gooseneck, not the individual faucets. I have the kit from BW - four rubber seals/washers, two metal "half" washers and an aerator. If you have photos of the procedure that would be even better! Thank you!

 

[Millsy 82]

You got any photos ?

 

[Jeffo405]

Here are photos of the washer/seal kit and the area where the leak is...

 

[Millsy 82]

Looks to me like that is a nut. Get a spanner on that nut and gently see if it moves. Once in there you should see the o rings to be replaced.

 

[Jeffo405]

Will the O rings that need replacing be obvious? Should I just replace everything at once?

 

[Ben-gee]

Replace everything that came in the pack