Show us yer mug!

[Leo21]

you must be the one on the rhs with the green top

Wish it was, I'd train to be a sparks if I had my time again.

 

[Dotty]

Here you go, seeing as you asked nicely.....

Thought you was never gonna give us a face pic!

 

[PlumbBobBob]

me

 

[SafeGasInstall]

Wish it was, I'd train to be a sparks if I had my time again.

would you really would become electrician ?

 

[Leo21]

would you really would become electrician ?

Probably not. Don't think I'd do this job though. Something easier on the back and knees.

 

[Mike Jackson]

This is me with Bertie.


CQ9R3847 by Mike Jackson1, on Flickr

 

[PlumbersMate]

Wow observant you are. Cannot believe you saw that. The wife used to work in their head office in putney

Please give her my thanks. Love nandos

 

[R1CKY]

Me and my Little'un.

 

[TBServices]

JESUS CHRIST!! ^ :uhoh2: Scared the **** out of me there.
______________________________________________

Although I've posted a couple before I suppose for this purpose built thread I'll post another. Fairly recent this one.

View attachment 12284

THERE CAN BE ONLY ONE!

 

[Guest123]

Thought you was never gonna give us a face pic!

A good match there, your face and my rse.:drool5:

 

[zeebeedee]

your face and my rse.:drool5:

Speaks volumes!

 

[Leo21]

another thread plummet to new depths.

 

[Guest123]

Well I heard Zeb had an inclination to the aforementioned above and I'm not talking about the face bit.:yesnod:

 

[Dotty]

A good match there, your face and my rse.:drool5:

My face ain't that hairy and my breaths not that bad!

 

[on31ll]

Please give her my thanks. Love nandos

Actually legally called NANDOS CHICKENLAND

 

[SimonG]

Who's for tea?



https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcQlYDlutUg9N0R2dpnnzqMTCZO_DvIHvDQGmuTJFgRXC3yPo8yHSg

 

[Keefy]

Well one thing's for certain, if a UKPF get-together does happen we might as well bring the our other halves because there won't be any ladies talking to us.

 

[Kyle87]

 

[Keefy]

Struggling with that aren't you? Go on lad you can do it!!

 

[Kyle87]

Why stand when you can sit, why sit when you can lie......

Old army logic!

I could stand and do it with one hand or use a spring.....

Or I could use the most effortless technique to get the job done and spare some energy for the Missus when I get home 😉

 

[Leo21]

If your still smiling you haven't been doing it long enough.

 

[Guest123]

Get that feckin flexie out of that bending machine or you're getting banned.:yesnod:

 

[Kyle87]

Wasn't smiling earlier when I had to get the first fix done before a chippy could start. Old threaded copper pipe. The 3/4 was fine with ef adapters but could I get any fitting on the 1/2 inch. The walls of the pipe were so bloody thick. Like nothing I've ever seen before. Not a single fitting in the box would go on this pipe until I got the 15mm slip coupling on it. Think the pipework had been there
about 60 years.
Perseverance paid off.

Bottom line, I wasn't smiling!!

 

[Guest123]

Old 1/2" copper = big bucks at the scrappie! You can get adapters in compression, soldered and even Speedfit and I always carry a few of each in the van.

 

[TFGplumbing]