Search the forum,

toilet waste

Sewage (or domestic sewage, domestic wastewater, municipal wastewater) is a type of wastewater that is produced by a community of people. It is typically transported through a sewer system.: 175  Sewage consists of wastewater discharged from residences and from commercial, institutional and public facilities that exist in the locality.: 10  Sub-types of sewage are greywater (from sinks, bathtubs, showers, dishwashers, and clothes washers) and blackwater (the water used to flush toilets, combined with the human waste that it flushes away). Sewage also contains soaps and detergents. Food waste may be present from dishwashing, and food quantities may be increased where garbage disposal units are used. In regions where toilet paper is used rather than bidets, that paper is also added to the sewage. Sewage contains macro-pollutants and micro-pollutants, and may also incorporate some municipal solid waste and pollutants from industrial wastewater.
Sewage usually travels from a building's plumbing either into a sewer, which will carry it elsewhere, or into an onsite sewage facility. Collection of sewage of several households together usually takes places in either sanitary sewers or combined sewers. The former is designed to exclude stormwater flows whereas the latter is designed to also take stormwater. The production of sewage generally corresponds to the water consumption. A range of factors influence water consumption and hence the sewage flowrates per person. These include: Water availability (the opposite of water scarcity), water supply options, climate (warmer climates may lead to greater water consumption), community size, economic level of the community, level of industrialization, metering of household consumption, water cost and water pressure.: 20 The main parameters in sewage that are measured to assess the sewage strength or quality as well as treatment options include: solids, indicators of organic matter, nitrogen, phosphorus, and indicators of fecal contamination.: 33  These can be considered to be the main macro-pollutants in sewage. Sewage contains pathogens which stem from fecal matter. The following four types of pathogens are found in sewage: pathogenic bacteria, viruses, protozoa (in the form of cysts or oocysts) and helminths (in the form of eggs). In order to quantify the organic matter, indirect methods are commonly used: mainly the Biochemical Oxygen Demand (BOD) and the Chemical Oxygen Demand (COD).: 36 Management of sewage includes collection and transport for release into the environment, after a treatment level that is compatible with the local requirements for discharge into water bodies, onto soil or for reuse applications.: 156  Disposal options include dilution (self-purification of water bodies, making use of their assimilative capacity if possible), marine outfalls, land disposal and sewage farms. All disposal options may run risks of causing water pollution.

View More On Wikipedia.org
  1. L

    Toilet Waste

    Why are there so many issues ,had to replace toilet, Grey waste going into wall is about 3inch higher then the toilet itself, did connect with flex waste but the angle of the waste pipe look all wrong , the grey waste pipe is easy to get to outside, my idea is to put a new grey waste through the...
  2. G

    Toilet waste lower than soil pipe in wall by 50mm

    Hello All. I have been reading a few threads on the forum, notably "Offset toilet waste connector (small offset)?" in the main Plumbing Forum, but wondered if anyone had any thoughts to help me? I want to replace the toilet in my bathroom. Presently the toilet sits on a 50mm wooden plinth -...
  3. C

    bath and sink waste with toilet waste

    Hi Group, Would it be OK to have the waste water from the bath and the sink tapped into the side of the toilet waste pipe? Are there specific fittings for doing this? Thank in advance Mike
  4. M

    toilet waste run

    Am looking to run 1st floor toilet waste under floor - joists run the right way - am looking at using a swan neck mcalpine pan connector to keep away from joist that runs parallel with wall - depth of joists are 165mm and run from pan to stack is 1620mm - if i put the pan connector into a 92.5...
  5. M

    help with bathroom waste

    I will be starting my bathroom refit next week - would like some views on how to run the waste - have tried to draw a plan showing how waste will run (not brilliantly to scale ) - what I need to know is: - How should I run the wastes for the basin and shower once they exit the wall - should I...
  6. A

    Connecting Additional toilet (saniflow) to existing waste pipe from inside

    Hi All Experts, Need a bit of advice as my plumber is not able to provide a solution. It is a simple issue as it seems. I have separate bathroom and toilet rooms. What I want is an extra toilet in Bathroom. Rest all is sort is sorted apart from the problem that I cannot put hole into wall...
  7. S

    Multifit toilet connector

    I have a query regarding a Multifit toilet waste connector. I have conflicting advice, one that it is a 360 deg use item and can be used to align any height difference no matter the angle between the back of the pan and the waste outlet. The other advice is that it can only be used 90 deg or so...
  8. A

    Soil sub stack issue

    Hi all, Been to veiw a property today that the customer would like a new down stairs cloakroom with shower in. The room has been plastered and first fix of pipework is in and the drainage has been layed below a block and beam floor. The foul drain runs into an open chamber beneath a man hole...
  9. P

    soil stack seal repair

    Hi to All, I have a soil stack where the putty or cement has blown off due to the cold weather, My question is what is the best way to reseal it is it best to use putty or cement it? The seal has gone where the toilet waste enters the stack - any help appreciated.
  10. J

    Dismantling toilet waste pipe?

    To be able to unsolder a pipe connection and to solder a new one I think I will have to remove the toilet waste first. In the shower room below the bathroom the bathroom waste comes down the corner of the shower room, behind the waste are the two 15mm pipes for the shower room basin, They...
  11. R

    Toilet Waste Connection problem

    Hi Guys I’m sure this one comes up a quite a bit, but haven’t found a post with quite the same situation. I am fitting a new toilet in my existing bathroom. The existing stack is cast iron as was the pipe connection to the old toilet waste. I have taken all this out now, but have...
  12. A

    new soil stacks

    all got a customer who has had an extension done to a bungalow. In the new extension is a bedroom with an en suite. Just wanted some advice regarding the soil stack. The toilet in the en suite is situated directly under a window, obviously the soil stack cant got directly out of the toilet...
  13. S

    Revision question help

    I'm retaking one of my exams and there is a question in there that confuses me. in the drawing for the house, it has the soil stack coming up into the bathroom, in the corner of the room. Infront is a shower tray, and further along the wall is a WC. The question is, "an architect has specified...
  14. D

    Pressure relief pipe - where does it end

    Hi I recently replaced a boiler in my new flat and hooked it up to the existing pressure relief pipe run. However, i can't see where the run ends as it disappears beneath the bathroom floor which is tiled. The only pipes it can connect to are the bath waste and/or toilet waste (i suspect...
  15. E

    Moving the toilet waste pipe in floor

    I'm renovating a bathroom in a 1960 bungalow and want to put in a new close coupled toilet. The waste in the floor is 20 cm from wall, so I've been advised to dig out round the pipe and fit an adjustable pipe that will come out closer to the wall. I've now dug down about 9" and have found the...
  16. F

    flexible toilet waste good or bad idea?

    Hey guys and gals, Need some advice, I have a client that has ordered a new toilet and wants me to fit it for them.... The only problem is, that the waste pipe comes in from the side, and is the old 4 1/2 inch pipe which I cannot get around, and the toilet pan they have bought will only a 5...
  17. L

    max pipe run

    Hi, Can anybody tell me what the max internal pipe run for 100mm toilet waste pipe should be. The toilet is on a first floor there is no stack and it leads to a septic tank. The original toilet was a masarator. thanks
  18. O

    Soil stack and pipe routing advice

    Hi there, I'm new here and I must apologise in advance as I am not a plumber but an individual who's about to embark on having their small bathroom redone and I have a question I was hoping I might be able to get your expertise on. Please see 2 pictures below of my bathroom. The first has the...
  19. S

    Offset toilet waste connector (small offset)?

    When I tried to fit my toilet to its waste pipe I found that the 110mm pipe sticking out of the wall is slighly lower than the outlet of the toilet. I can get the straight waste connector that I have (KWIKFIT SK40) to fit onto the toilet and into the plastic waste pipe but it is really pinching...
  20. D

    Toilet help

    hi, i have been told by my builder that the building inspector has told him that there is no room for a manhole in a garage conversion, he told him that he will need a toilet that you can rod the drain! has anyone got any knowledge of this?
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock