What a nightmare in my eyes...

[Old Account]

Did the Worcester guy screw down the flue or leave it?

After I mentioned it and he inspected the flue he took some screws and screwed it down. He can not leave it like this that's what he mentioned. I believe he has noted it on his laptop.

What would you guys tell him this evening? The engineer of he asks for review etc

 

[Scott_D]

Tell him Worcester fixed the pump but 'at risked' the boiler due to the poorly fitted flue. You had to pay someone else to sort out the flue.

 

[Old Account]

Tell him Worcester fixed the pump but 'at risked' the boiler due to the poorly fitted flue. You had to pay someone else to sort out the flue.

Thanks Scott,

I get your point but he will ask me now in 10 min he had to come anyway to commission the boiler. Why would I take someone else to make good? The boiler couldn't be left running as I said to him it isn't comssioned yet and therefore please isolate the gas and electrics. That's what worcest r did. Now I am on my way to him to let it sign off and benchmark fill per out.

 

[Scott_D]

Ah right
Tell him you wont leave a bad review but you are not happy with the quality of the install or the way the flue was left and you wont be using him again.

 

[king of pipes]

Ronny the guy screwed you over problem is you need him to register it and complete the benchmark so probably going put up with it , i would not let him do anything else for you but your choice. Kop

 

[Old Account]

Ronny the guy screwed you over problem is you need him to register it and complete the benchmark so probably going put up with it , i would not let him do anything else for you but your choice. Kop

That's the only hong they have filled out now ... I'm still here and I'll make ute I won't use this guy again.

 

[mfgs]

How are they different hole is a hole,

me personally I would ar it

How are they different?

One is manufactured that way and tested with a TB stating its ok.

The other is an incorrectly fitted seal on the appliance with no such TB covering such a bodge job.

Surely this is just a simple case of being able to interpret the regulations. You are a clever guy, you know your are wrong , you just probably don't want to admit it.

 

[mfgs]

That's the only hong they have filled out now . I'm still here and I'll make ute I won't use this guy again.

View attachment 32022

Those figures on the benchmark are made up. 29ppm and 9.3% don't give a 0.0008 ratio.

 

[Old Account]

Those figures on the benchmark are made up. 29ppm and 9.3% don't give a 0.0008 ratio.

What can I do ? They want to leave the casing off because they need to take the kitchen cupboard off and it's late they leave the boiler on with full electricity they said it's fine

 

[mfgs]

What can I do ? They want to leave the casing off because they need to take the kitchen cupboard off and it's late they leave the boiler on with full electricity they said it's fine

What?

 

[king of pipes]

What do you guys make of the benchmark ? filled in sitting in the van i bet ,You have named and shamed him now Ronny i would edit that bud while you can its a tricky situation you have got yourself in tread carefully mate its not registered until he does it with gas safe . Kop

 

[Old Account]

What do you guys make of the benchmark ? filled in sitting in the van i bet ,You have named and shamed him now Ronny i would edit that bud while you can. Kop

Just going home and will answer in 2 min

 

[mfgs]

Who else has looked him up on the Gas Safe website? haha

 

[Old Account]

Just going home and will answer in 2 min

Here that's the way they left it

 

[king of pipes]

So you cant even get the casing on and off ? Unbelievable. Kop

 

[ShaunCorbs]

who left it Worcester?

 

[mfgs]

Something doesn't add up here

 

[king of pipes]

The installer Shaun have a look at the benchmark those figures are not right and there things missing wheres the print offs of flue gas analysis i staple them to the benchmark .

 

[Old Account]

What do you guys make of the benchmark ? filled in sitting in the van i bet ,You have named and shamed him now Ronny i would edit that bud while you can its a tricky situation you have got yourself in tread carefully mate its not registered until he does it with gas safe . Kop

It is already registered as he had to call them last week and they have asked about the address and what boiler it etc,.. I will call them tomorrow and will ask if the boiler has been registered. I will hunt it down trust me there.

 

[ShaunCorbs]

The installer Shaun have a look at the benchmark those figures are not right and there things missing wheres the print offs of flue gas analysis i staple them to the benchmark .

cant be as ron said the boiler wouldnt fire and by the looks of it its fired